I am a fan of Murdoch Mysteries, a Canadian TV drama
series set in the 1890's. For those unfamiliar with the
plot, Constable William Murdoch is a Toronto detective who
solves his cases using methods of detection that were new to
the time. There are many scenes set in the streets of Toronto
and I enjoy seeing all the shop signs that have been recreated
for filming. They also shoot scenes in the city morgue
which has a great turn of the century look. When I was
working on this next project I envisioned this cabinet in that
setting with white vintage labelling on the glass. But how to
recreate that for myself?
I understood the principals of what I wanted to do but I needed the right tools. The secret ingredient
turned out to be these craft smart paint pens (seen below). Of all the different pens I have tried for
projects I found these worked great for glass and they are not too expensive at Michaels.
I TRACED THE IMAGE ONTO THE INSIDE OF THE GLASS DOORS
I printed my graphic in reverse with an ink jet printer.
I took the doors off the cabinet to work on them laying flat.
I cleaned both sides of the glass thoroughly before moving on.
I taped the reverse image onto the front of the glass door facing the glass.
I made sure the pen was ready to go, there is full instructions on the packaging.
You need to have confidence and just go with the flow once you start tracing.
I am right handed so I worked left to right, top to bottom, so I did not smudge the paint.
I used an entire pen on each door.
Once both doors were finished and put back onto the cabinet I took a razor blade and touched up
some of the graphic by removing little bits of the white paint between letters. This paint is also water
resistant so you can wash over the paint with mild soap and water when needed.
Just think, the possibilities are endless!
PS if you make a horrible mistake you can scrape it off with a razor blade